72V211L15PFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Max Supply Current | 20mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 512X9 |
| Standby Current-Max | 0.005A |
| Memory Density | 4608 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V211L15PFI Overview
LQFP is a package that contains FIFO memory chip.A Surface Mount mounting method is recommended.A supply voltage of 3.3V allows for high efficiency.FIFO means contains a total of 32 terminations.There are 32 pins on the operation pins.Its maximum operating current is 20mA .In order to maximize efficiency, the supply voltage should be set to 3.3V .At a minimum working temperature of -40°C degrees Celsius, FIFO is guaranteed to operate reliably.An operating temperature of 85°C °C is necessary for stable operation.A self-contained gadget is contained within FIFOs .In this part, the memory type is OTHER FIFO .If the supply voltage is very low, such as 3V V, FIFO may be able to operate.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.Approximately 32 pins are attached to it.A FIFO memory's maximum value of 66.7MHz can be used for regular operation.
72V211L15PFI Features
FIFOs category
Frequency at most
72V211L15PFI Applications
There are a lot of Integrated Device Technology (IDT) 72V211L15PFI FIFOs Memory applications.
- Test site
- Down-Hole Energy Drilling
- Communications
- Thermal Management for DDR3 Memory Modules
- Emulators
- Computer networks
- IP Radio
- IP Camera Buffer
- Computers
- SPD for DDR3 Memory Modules
