72V211L20J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V211L20J8 Overview
PLCC is a package that contains FIFO memory chip.It's packaged in the shape of a Tape & Reel .The recommended mounting way is Surface Mount .When the supply voltage is 3.3V there is the possibility of high efficiency.FIFO means contains 32 terminations.There are 32 pins on the operation pins.For its operation, 20mA is the maximum current required.FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.The gadget is self-contained and can be found in FIFOs .In this part, the memory type is OTHER FIFO .FIFO memory chips may be operated at very low supply voltages, such as 3V volts.A maximum supply voltage of 3.6V V can be handled by this FIFO memory chip.There are a total of 32 pins on this FIFO memory IC.When the frequency is set to 50MHz , the system can maintain good accuracy.Normally, the FIFO memory's maximum value is 50MHz .
72V211L20J8 Features
FIFOs category
Frequency at most
72V211L20J8 Applications
There are a lot of Integrated Device Technology (IDT) 72V211L20J8 FIFOs Memory applications.
- Portable Information Devices
- Data
- Desktop Computers
- Product traceability
- Firmware loaders
- Cameras
- SPI Bus Flash Memory Devices
- Measurement Equipment
- Disk Controllers
- Smart Meter
