72V211L20PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 50MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 512X9 |
| Density | 4.5 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V211L20PF8 Overview
You will find FIFO memory chip in the TQFP package.There is a case Tape & Reel in which it is packaged.The recommended mounting way is Surface Mount .High efficiency is possible with a supply voltage of 3.3V .FIFO means contains a total of 32 terminations.As far as the operation pins are concerned, they are 32 pins.In order for FIFO design to operate, a maximum current of 20mA is required.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.A self-contained gadget is contained in FIFOs .It has a OTHER FIFO memory type IC.Typically, FIFO would work at 3V volts, but it may also work at higher voltages.A maximum supply voltage of 3.6V V can be handled by this FIFO memory chip.A total of 32 pins are present on the FIFO memory IC.In the presence of a 50MHz frequency, it can maintain good accuracy.The memory logic's maximum value is 50MHz for regular operation.
72V211L20PF8 Features
FIFOs category
Frequency at most
72V211L20PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V211L20PF8 FIFOs Memory applications.
- Seismic Data Collection at Extreme Temperatures
- General Data Collection Applications at Low-Temperatures
- GPS Offender Tracking
- General Data Collection Applications at Extreme High-Temperatures
- Game Consoles
- Data communications
- Network bridges
- PC peripheral
- Analog-to-digital converters
- HDD
