72V215L10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | EASILY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 512X18 |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V215L10PF8 Overview
This package is included in TQFP .You'll find it packaged in the shape of a Tape & Reel .Mounting it Surface Mount is recommended.A supply voltage of 3.3V allows for high efficiency.As a result of this, FIFO means contains 64 terminations.These are the 64 pins for operation.Its maximum operating current is 30mA .In order to maximize efficiency, the supply voltage should be set to 3.3V .During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.This gadget is self-contained in?FIFOs .A OTHER FIFO memory type IC is used in the part.FIFO memory chips may be operated at very low supply voltages, such as 3V volts.FIFO memory is capable of handling a maximum supply voltage of 3.6V volts.It consists of a total of 64 pins.A frequency of 100MHz is capable of maintaining good accuracy.During regular operation, the FIFO memory's maximum value is 100MHz .Additionally, this FIFO memory can be used to generate EASILY EXPANDABLE IN DEPTH AND WIDTH .
72V215L10PF8 Features
FIFOs category
Frequency at most
72V215L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V215L10PF8 FIFOs Memory applications.
- Fabrication Site
- Signal processing
- TVs
- Notebook
- SPI Bus Flash Memory Device
- Communications
- Tape controllers
- Thermal Management for DDR3 Memory Modules
- Battery Charger
- Test site
