72V215L10TF
| Parameters | |
|---|---|
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 512X18 |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | EASILY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
72V215L10TF Overview
FIFO memory chip can be found in the LQFP package.The recommended mounting method for this FIFO products is Surface Mount .With a supply voltage of 3.3V volts, high efficiency is possible.A total of 64 terminations are contained within FIFO means.In the case of the operation pins, they are 64 pins.FIFO requires a minimum of 30mA current to operate.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.70°C °C is the memory logic's maximum operating temperature that allows stable operation.FIFOs contains this gadget in its entirety.It has a type OTHER FIFO memory IC.There is a possibility that FIFO can operate at very low supply voltages, such as 3V V.The FIFO memory chip is capable of handling maximum supply voltages of 3.6V volts.This FIFO memory IC is equipped with 64 pins in total.A frequency of 100MHz is capable of maintaining good accuracy.There is 100MHz FIFO memory IC's maximum value for regular operation.Additionally, this FIFO memory can be used to generate EASILY EXPANDABLE IN DEPTH AND WIDTH .
72V215L10TF Features
FIFOs category
Frequency at most
72V215L10TF Applications
There are a lot of Integrated Device Technology (IDT) 72V215L10TF FIFOs Memory applications.
- Buses
- SPD for DDR3 Memory Modules
- Communications Systems
- Desktop Computers
- Portable Information Devices
- Queues for communication systems
- HDD
- Routers
- Networking
- SPI Bus Flash Memory Device
