72V215L10TF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | EASILY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 512X18 |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V215L10TF8 Overview
This package is included in TQFP .Memory IC's recommended mounted way is Surface Mount .When the supply voltage is 3.3V there is the possibility of high efficiency.A total of 64 terminations are contained within FIFO means.These are the 64 pins for operation.In order to operate FIFO design, a maximum current of 30mA is required.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.This gadget is self-contained in?FIFOs .In this part, the memory type is OTHER FIFO .In some cases, FIFO operates at a very low supply voltage, such as 3V V.The memory logic's maximum supply voltage is 3.6V volts.A total of 64 pins are present on the FIFO memory IC.It maintains good accuracy at a 100MHz frequency.For regular operation, the memory logic's maximum value is 100MHz .With the help of this FIFO memory, EASILY EXPANDABLE IN DEPTH AND WIDTH can also be generated.
72V215L10TF8 Features
FIFOs category
Frequency at most
72V215L10TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V215L10TF8 FIFOs Memory applications.
- Battery Charger
- Consumer Systems
- Thermal Management for DDR3 Memory Modules
- Portable Information Devices
- SPI Bus Flash Memory Devices
- Cameras
- Event Recorder
- SPI Bus Flash Memory Device
- Address mapping
- Network switching/routing
