72V215L15PFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 512X18 |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V215L15PFI8 Overview
TQFP is a package that contains FIFO memory chip.There's a Tape & Reel on the package.A Surface Mount mounting method is recommended.With a supply voltage of 3.3V volts, high efficiency is possible.I found that it has 64 terminations in FIFO means.FIFO design has 64 operation pins.In order to operate it, it requires 30mA volts of current.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .During operation, a minimum temperature of -40°C degrees Celsius should be maintained in order to ensure reliability.A memory logic's maximum operating temperature of 85°C degrees Celsius assures stable operation.It is self-contained in FIFOs .It has a OTHER FIFO memory type IC.FIFO may operate at very low supply voltages, such as 3V volts.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.It consists of a total of 64 pins.It maintains good accuracy at a 66.7MHz frequency.The memory logic's maximum value is 66.7MHz for regular operation.
72V215L15PFI8 Features
FIFOs category
Frequency at most
72V215L15PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72V215L15PFI8 FIFOs Memory applications.
- Character generators
- Product traceability
- Computers
- Extended product-change notification
- Alarm System
- Cardiac Monitoring Device
- Data communications
- Game Controller
- PC peripheral
- GPS Offender Tracking
