72V215L15TFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2001 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 512X18 |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V215L15TFI Overview
LQFP is a package that contains FIFO memory chip.It is recommended that memory IC be mounted in the Surface Mount direction.Supply voltages of 3.3V are capable of achieving high efficiency.A total of 64 terminations are contained within FIFO means.64 pin is used for operation.The maximum current required for its operation is 30mA .The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.By using a memory logic's maximum operating temperature of 85°C degrees Celsius, stable operation can be achieved.FIFOs contains this gadget in its entirety.A OTHER FIFO memory type IC is used in the part.FIFO memory chips may be operated at very low supply voltages, such as 3V volts.There is a maximum supply voltage of 3.6V volts that FIFO memory can handle.There are a total of 64 pins on this board.When the frequency is set to 66.7MHz it can maintain good accuracy.Normally, the FIFO memory's maximum value is 66.7MHz .
72V215L15TFI Features
FIFOs category
Frequency at most
72V215L15TFI Applications
There are a lot of Integrated Device Technology (IDT) 72V215L15TFI FIFOs Memory applications.
- Buses
- Digital buffering
- Look-up Tables
- Event Recorder
- Network bridges
- Multi-stage synchronizer
- IP Radio
- Product traceability
- Data
- Consumer
