72V215L20TF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | EASILY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 512X18 |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V215L20TF Overview
FIFO memory chip is contained in the LQFP package.Mounting it in the Surface Mount way is recommended.If the supply voltage is set to 3.3V , high efficiency can be achieved.As a result of this, FIFO means contains 64 terminations.FIFO design has 64 operation pins.FIFO design requires 30mA amps of current to operate.FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.A self-contained gadget is contained in FIFOs .In this part, the memory type is OTHER FIFO .In some cases, FIFO operates at a very low supply voltage, such as 3V V.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.A total of 64 pins are present on the FIFO memory IC.It is capable of maintaining good accuracy with a frequency of 50MHz .It is recommended that the FIFO memory's maximum value be set to 50MHz .It is also possible to generate EASILY EXPANDABLE IN DEPTH AND WIDTH by using this FIFO memory.
72V215L20TF Features
FIFOs category
Frequency at most
72V215L20TF Applications
There are a lot of Integrated Device Technology (IDT) 72V215L20TF FIFOs Memory applications.
- Consumer
- MP3 Interface for Automobile
- Thermal Management for DDR3 Memory Modules
- IP Radio
- Cameras
- Battery Charger
- Transistors
- One assembly
- Networking
- Optical memories
