72V215L20TF8
| Parameters | |
|---|---|
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 512X18 |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | EASILY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
72V215L20TF8 Overview
FIFO memory chip is included in the LQFP package.Memory IC's recommended mounted way is Surface Mount .Supply voltages of 3.3V are capable of achieving high efficiency.FIFO means contains a total of 64 terminations.The operation pins are 64 pins.In order to operate it, it requires 30mA volts of current.FIFO is recommended that the supply voltage be set to 3.3V for maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.In FIFOs , this gadget is self-contained.ICs of type OTHER FIFO are used in the FIFO memory chip.Typically, FIFO would work at 3V volts, but it may also work at higher voltages.The FIFO memory chip is capable of handling maximum supply voltages of 3.6V volts.It has a total of 64 pins on it.When the frequency is set to 50MHz , the system can maintain good accuracy.50MHz is the FIFO memory IC's maximum value for regular operation.Using this gadget, EASILY EXPANDABLE IN DEPTH AND WIDTH can also be generated.
72V215L20TF8 Features
FIFOs category
Frequency at most
72V215L20TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V215L20TF8 FIFOs Memory applications.
- Rate buffers
- Seismic Data Collection at Extreme Temperatures
- Extended product-change notification
- Fabrication Site
- Address mapping
- SPD for DDR3 Memory Modules
- SPI Bus Flash Memory Device
- MP3 Interface for Automobile
- Signal processing
- Game Controller
