72V221L10J8
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Max Supply Current | 20mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 1KX9 |
| Standby Current-Max | 0.005A |
| Memory Density | 9216 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LCC |
| Number of Pins | 32 |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
72V221L10J8 Overview
You can find FIFO memory chip in the LCC package.This FIFO memory chip is packaged as a Tape & Reel (TR) .It is recommended that memory IC be mounted in the Surface Mount direction.It is possible to achieve high efficiency with a supply voltage of 3.3V .I found that it has 32 terminations in FIFO means.As far as the operation pins are concerned, they are 32 pins.FIFO design requires a maximum current of 20mA to operate.A supply voltage of 3.3V is recommended for FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.FIFOs contains this gadget in its entirety.The IC of the part is of the type OTHER FIFO .Low supply voltages, such as 3V V, may be required for operation.FIFO memory can handle a maximum supply voltage of 3.6V volts.A total of 32 pins are present on the FIFO memory IC.Normally, the FIFO memory's maximum value is 100MHz .
72V221L10J8 Features
FIFOs category
Frequency at most
72V221L10J8 Applications
There are a lot of Integrated Device Technology (IDT) 72V221L10J8 FIFOs Memory applications.
- High-speed graphics pixel buffer
- Extended product life cycle
- Cardiac Monitoring Device
- TVs
- Transistors
- Extended product-change notification
- Switches
- Telecommunication
- Emulators
- Battery Charger
