72V221L10PFG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 1KX9 |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V221L10PFG Overview
You will find FIFO memory chip in the TQFP package.Mounting it in the Surface Mount way is recommended.When the supply voltage is 3.3V there is the possibility of high efficiency.FIFO means contains 32 terminations.32 pin is used for operation.In order to operate it, it requires 20mA volts of current.A voltage of 3.3V should be used for FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.A self-contained gadget is contained within FIFOs .In this part, the memory type is OTHER FIFO .The FIFO memory chip may be operated at very low supply voltages, such as3V volts.A maximum supply voltage of 3.6V volts can be handled by the FIFO memory chip.This FIFO memory IC is equipped with 32 pins in total.It maintains good accuracy at a 100MHz frequency.There is 100MHz FIFO memory IC's maximum value for regular operation.
72V221L10PFG Features
FIFOs category
Frequency at most
72V221L10PFG Applications
There are a lot of Integrated Device Technology (IDT) 72V221L10PFG FIFOs Memory applications.
- Transistors
- Video Processing
- Smart Meter
- SPI Bus Flash Memory Device
- Alarm System
- Industrial Systems
- GPS Offender Tracking
- Extended product life cycle
- Fabrication Site
- Network bridges
