72V221L10PFG8
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Max Supply Current | 20mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 1KX9 |
| Standby Current-Max | 0.005A |
| Memory Density | 9216 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
72V221L10PFG8 Overview
The LQFP package contains FIFO memory chip.It's packaged in the shape of a Tape & Reel .Memory IC's recommended mounted way is Surface Mount .High efficiency is possible with a supply voltage of 3.3V .FIFO consists of 32 terminations, which indicates that FIFO means is empty.In the case of the operation pins, they are 32 pins.In order for FIFO design to operate, FIFO design requires a maximum current of 20mA .In order to maximize efficiency, the supply voltage should be set to 3.3V .It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.This gadget is self-contained in?FIFOs .This part is equipped with an IC of type OTHER FIFO memory.If the supply voltage is very low, such as 3V V, FIFO may be able to operate.The FIFO memory chip is capable of handling maximum supply voltages of 3.6V volts.A total of 32 pins are present on the FIFO memory IC.Regular operation has a FIFO memory's maximum value of 100MHz .
72V221L10PFG8 Features
FIFOs category
Frequency at most
72V221L10PFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V221L10PFG8 FIFOs Memory applications.
- Extended product life cycle
- Cameras
- Routers
- Computer networks
- IP Radio
- Multi-stage synchronizer
- Networking
- Communications
- Game Consoles
- MP3 Interface for Automobile
