72V221L15JI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Max Supply Current | 20mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 1KX9 |
| Standby Current-Max | 0.005A |
| Memory Density | 9216 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V221L15JI Overview
The PLCC package contains FIFO memory chip.Mounting it in Surface Mount is recommended.High efficiency is possible with a supply voltage of 3.3V .As a result of this, FIFO means contains 32 terminations.In the case of the operation pins, they are 32 pins.Its maximum operating current is 20mA .FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.At a minimum working temperature of -40°C degrees Celsius, FIFO is guaranteed to operate reliably.By operating at a temperature of 85°C °C, the FIFO products is capable of stable operation.FIFOs contains this gadget in its entirety.It has a type OTHER FIFO memory IC.In some cases, FIFO operates at a very low supply voltage, such as 3V V.There is a maximum supply voltage of 3.6V volts that FIFO memory can handle.Currently, it has 32 pins.Regular operation has a FIFO memory's maximum value of 66.7MHz .
72V221L15JI Features
FIFOs category
Frequency at most
72V221L15JI Applications
There are a lot of Integrated Device Technology (IDT) 72V221L15JI FIFOs Memory applications.
- Signal processing
- Digital buffering
- IP Radio
- Address mapping
- Look-up Tables
- Temporary storage elements
- SPI Bus Flash Memory Device
- One assembly
- Product traceability
- Down-Hole Energy Drilling
