72V221L15PFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 1KX9 |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V221L15PFI Overview
You can find FIFO memory chip in the TQFP package.Mounting it in the Surface Mount way is recommended.An input voltage of 3.3V results in high efficiency.A total of 32 terminations can be found in FIFO means.In the case of the operation pins, they are 32 pins.FIFO design requires a maximum current of 20mA to operate.When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.FIFO operates at a minimum temperature of -40°C degrees Celsius to ensure reliabilFIFOy.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.The gadget is self-contained and can be found in FIFOs .This part has a memory type of OTHER FIFO .The FIFO memory chip may be operated at very low supply voltages, such as3V volts.The memory logic's maximum supply voltage is 3.6V volts.Approximately 32 pins are attached to it.In the presence of a 66.7MHz frequency, it can maintain good accuracy.Regular operation has a FIFO memory's maximum value of 66.7MHz .
72V221L15PFI Features
FIFOs category
Frequency at most
72V221L15PFI Applications
There are a lot of Integrated Device Technology (IDT) 72V221L15PFI FIFOs Memory applications.
- Networking
- Alarm System
- Programmable Logic Controller
- Down-Hole Energy Drilling
- Thermal Management for DDR3 Memory Modules
- Firmware loaders
- Signal processing
- Code converters
- Notebook
- Computers
