72V221L15PFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Max Supply Current | 20mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 1KX9 |
| Standby Current-Max | 0.005A |
| Memory Density | 9216 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V221L15PFI8 Overview
The LQFP package contains FIFO memory chip.Tape & Reel case is used for packaging.A Surface Mount mounting method is recommended.Supply voltages of 3.3V are capable of achieving high efficiency.FIFO means contains 32 terminations.In the case of the operation pins, they are 32 pins.FIFO design requires 20mA amps of current to operate.When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at -40°C degrees Celsius at all times.By using a memory logic's maximum operating temperature of 85°C degrees Celsius, stable operation can be achieved.In FIFOs , this gadget is self-contained.This part has a memory type of OTHER FIFO .FIFO may operate at a very low supply voltage, such as 3V V.There is a maximum supply voltage of 3.6V volts that FIFO memory can handle.It has a total of 32 pins on it.There is 66.7MHz FIFO memory IC's maximum value for regular operation.
72V221L15PFI8 Features
FIFOs category
Frequency at most
72V221L15PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72V221L15PFI8 FIFOs Memory applications.
- Measurement Equipment
- GPS Offender Tracking
- Disk Controllers
- Address mapping
- Tape controllers
- Firmware loaders
- Network bridges
- Thermal Management for DDR3 Memory Modules
- Battery Charger
- Network switching/routing
