72V221L20J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 50MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 1KX9 |
| Density | 9 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V221L20J Overview
The PLCC package contains FIFO memory chip.Surface Mount is memory IC's recommended mounting method.It is possible to achieve high efficiency with a supply voltage of 3.3V .FIFO consists of 32 terminations, which indicates that FIFO means is empty.There are 32 pins for operation.FIFO design requires 20mA amps of current to operate.FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.FIFOs contains this gadget in its entirety.There is a memory type OTHER FIFO in the IC of this part.Typically, FIFO would work at 3V volts, but it may also work at higher voltages.A maximum supply voltage of 3.6V V can be handled by this FIFO memory chip.The FIFO memory IC has a total of 32 pins.It is capable of maintaining good accuracy with a frequency of 50MHz .It is recommended that the FIFO memory's maximum value be set to 50MHz .
72V221L20J Features
FIFOs category
Frequency at most
72V221L20J Applications
There are a lot of Integrated Device Technology (IDT) 72V221L20J FIFOs Memory applications.
- SPI Bus Flash Memory Device
- Event Recorder
- Video Processing
- Product traceability
- Computer Systems
- Look-up Tables
- Notebook
- Fabrication Site
- Battery Charger
- Test site
