72V223L6PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 166MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 166MHz |
| Access Time | 4 ns |
| Organization | 512X18 |
| Density | 9 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V223L6PF8 Overview
This package is included in TQFP .The recommended mounting way is Surface Mount .When the supply voltage is 3.3V , high efficiency is possible.A total of 80 terminations are contained within FIFO means.These are the 80 pins for operation.FIFO design requires a maximum current of 35mA to operate.FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.There is a self-contained gadget within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.In some cases, FIFO operates at a very low supply voltage, such as 3.15V V.FIFO memory is capable of handling a maximum supply voltage of 3.45V volts.There are a total of 80 pins on this FIFO memory IC.In the presence of a 166MHz frequency, it can maintain good accuracy.It is recommended that the FIFO memory's maximum value be set to 166MHz .
72V223L6PF8 Features
FIFOs category
Frequency at most
72V223L6PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V223L6PF8 FIFOs Memory applications.
- Consumer Systems
- Tape controllers
- IP Camera Buffer
- Cardiac Monitoring Device
- A/D output buffers
- Disk Controllers
- Digital buffering
- Buses
- Video time base correction
- Battery Charger
