72V223L7-5BC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Number of Pins | 100 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 133.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 133.3MHz |
| Access Time | 5 ns |
| Organization | 512X18 |
| Density | 9 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Height Seated (Max) | 1.5mm |
| Length | 11mm |
| Width | 11mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V223L7-5BC Overview
A Surface Mount mounting method is recommended.A supply voltage of 3.3V allows for high efficiency.FIFO means contains 100 terminations.The operation pins are 100 pins.In order for FIFO design to operate, FIFO design requires a maximum current of 35mA .A voltage of 3.3V should be used for FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.Its maximum operating temperature of 70°C °C ensures stable operation.The gadget in FIFOs is self-contained.In this part, the memory type is OTHER FIFO .FIFO may operate at very low supply voltages, such as 3.15V volts.A maximum voltage of 3.45V volts can be applied to FIFO memory.It consists of a total of 100 pins.It is capable of maintaining good accuracy with a frequency of 133.3MHz .During regular operation, 133.3MHz is the FIFO memory's maximum value.
72V223L7-5BC Features
FIFOs category
Frequency at most
72V223L7-5BC Applications
There are a lot of Integrated Device Technology (IDT) 72V223L7-5BC FIFOs Memory applications.
- Measurement Equipment
- Video time base correction
- Notebook
- Wireless
- Laser Receiver System
- Data communications
- Thermal Management for DDR3 Memory Modules
- Consumer Systems
- Battery Charger
- SPD for DDR3 Memory Modules
