Parameters |
Frequency (Max) |
133.3MHz |
Access Time |
5 ns |
Organization |
512X18 |
Density |
9 kb |
Standby Current-Max |
0.015A |
Parallel/Serial |
PARALLEL |
Sync/Async |
Synchronous |
Memory IC Type |
OTHER FIFO |
Bus Directional |
Unidirectional |
Retransmit Capability |
Yes |
Output Enable |
YES |
Height Seated (Max) |
1.6mm |
Length |
14mm |
Width |
14mm |
Thickness |
1.4mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Contact Plating |
Lead, Tin |
Mount |
Surface Mount |
Package / Case |
TQFP |
Number of Pins |
80 |
Published |
2009 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
80 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
HTS Code |
8542.32.00.71 |
Subcategory |
FIFOs |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Frequency |
133.3MHz |
Time@Peak Reflow Temperature-Max (s) |
20 |
Pin Count |
80 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
3.3V |
Temperature Grade |
COMMERCIAL |
Max Supply Voltage |
3.45V |
Min Supply Voltage |
3.15V |
Element Configuration |
Dual |
Max Supply Current |
35mA |
72V223L7-5PF8 Overview
You can find FIFO memory chip in the TQFP package.Surface Mount is memory IC's recommended mounting method.If the supply voltage is set to 3.3V , high efficiency can be achieved.FIFO means contains a total of 80 terminations.80 pins are used for operation.Its maximum operating current is 35mA .For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.A self-contained gadget is contained in FIFOs .The IC of the part is OTHER FIFO memory type.There is a possibility that FIFO may operate at a very low supply voltage, such as 3.15V V.A maximum supply voltage of 3.45V V can be handled by this FIFO memory chip.The FIFO memory IC is equipped with a total of 80 pins.In spite of the frequency 133.3MHz , it is capable of maintaining a good level of accuracy.During normal operation, the FIFO memory's maximum value is 133.3MHz .
72V223L7-5PF8 Features
FIFOs category
Frequency at most
72V223L7-5PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V223L7-5PF8 FIFOs Memory applications.
- Signal processing
- Medical Monitoring Device
- Routers
- Down-Hole Energy Drilling
- Alarm System
- Data
- Data-acquisition systems
- IP Radio
- Optical memories
- Emulators