72V225L10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | EASILY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 1KX18 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V225L10PF8 Overview
FIFO memory chip can be found in the TQFP package.Surface Mount is recommended as the mounting method.A supply voltage of 3.3V is capable of producing high efficiency.I found that it has 64 terminations in FIFO means.FIFO design has 64 operation pins.In order for FIFO design to operate, FIFO design requires a maximum current of 30mA .FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.FIFOs contains this gadget in its entirety.The IC of the part is OTHER FIFO memory type.There is a possibility that FIFO may operate at a very low supply voltage, such as 3V V.A maximum supply voltage of 3.6V V can be handled by this FIFO memory chip.The FIFO memory IC is equipped with a total of 64 pins.In the presence of a 100MHz frequency, it can maintain good accuracy.The memory logic's maximum value is 100MHz for regular operation.It is also possible to generate EASILY EXPANDABLE IN DEPTH AND WIDTH by using this FIFO memory.
72V225L10PF8 Features
FIFOs category
Frequency at most
72V225L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V225L10PF8 FIFOs Memory applications.
- SPI Bus Flash Memory Devices
- Routers
- Computers
- Address mapping
- Extended product life cycle
- Computer Systems
- Event Recorder
- Battery Charger
- Video time base correction
- Buses
