72V225L10PFG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | EASILY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 1KX18 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V225L10PFG8 Overview
You can find FIFO memory chip in package TQFP .Surface Mount is recommended as the mounting method.If the supply voltage is set to 3.3V , high efficiency can be achieved.I found that it has 64 terminations in FIFO means.There are 64 pins on the operation pins.FIFO design requires 30mA amps of current to operate.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.It is contained within FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.Low supply voltages, such as 3V V, may be required for operation.A maximum supply voltage of 3.6V volts can be handled by the FIFO memory chip.As a result, it contains a total of 64 pins.A frequency of 100MHz is sufficient to maintain good accuracy.The memory logic's maximum value is 100MHz for regular operation.It is also possible to generate EASILY EXPANDABLE IN DEPTH AND WIDTH with the use of this FIFO memory.
72V225L10PFG8 Features
FIFOs category
Frequency at most
72V225L10PFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V225L10PFG8 FIFOs Memory applications.
- Laser Receiver System
- Switches
- Disk Controllers
- Multimedia
- Wireless
- Analog-to-digital converters
- Optical memories
- Network bridges
- Multi-stage synchronizer
- Communications Systems
