72V225L10TF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | EASILY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 1KX18 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V225L10TF8 Overview
LQFP is the package in which FIFO memory chip is contained.This FIFO memory chip is packaged as a Tape & Reel .Surface Mount is memory IC's recommended mounting method.It is possible to achieve high efficiency with a supply voltage of 3.3V .FIFO consists of 64 terminations, which indicates that FIFO means is empty.64 pins are used for operation.FIFO requires a minimum of 30mA current to operate.A supply voltage of 3.3V is recommended for FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.Its maximum operating temperature of 70°C °C ensures stable operation.A self-contained gadget is contained within FIFOs .It has a type OTHER FIFO memory IC.FIFO memory chips may be operated at very low supply voltages, such as 3V volts.FIFO memory can handle a maximum supply voltage of 3.6V V.This FIFO memory IC is equipped with 64 pins in total.In spite of the frequency 100MHz , it is capable of maintaining a good level of accuracy.The memory logic's maximum value is 100MHz for regular operation.This gadget can also generate EASILY EXPANDABLE IN DEPTH AND WIDTH .
72V225L10TF8 Features
FIFOs category
Frequency at most
72V225L10TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V225L10TF8 FIFOs Memory applications.
- Look-up Tables
- Address mapping
- Rate buffers
- Wireless
- Temporary storage elements
- Routers
- Consumer Systems
- MP3 Interface for Automobile
- SPI Bus Flash Memory Devices
- Test Equipment
