72V225L15PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | EASILY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Max Supply Current | 30mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 1KX18 |
| Standby Current-Max | 0.005A |
| Memory Density | 18432 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V225L15PF Overview
LQFP is a package that contains FIFO memory chip.It is pointing in the direction of Surface Mount .When the supply voltage is 3.3V there is the possibility of high efficiency.FIFO means contains 64 terminations.In the case of the operation pins, they are 64 pins.FIFO design requires a maximum current of 30mA to operate.A voltage of 3.3V should be used for FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.The gadget is self-contained and can be found in FIFOs .In this part, the memory type is OTHER FIFO .Low supply voltages, such as 3V V, may be required for operation.The FIFO memory chip is capable of handling maximum supply voltages of 3.6V volts.It consists of a total of 64 pins.The memory logic's maximum value is 66.7MHz for regular operation.Additionally, this FIFO memory can be used to generate EASILY EXPANDABLE IN DEPTH AND WIDTH .
72V225L15PF Features
FIFOs category
Frequency at most
72V225L15PF Applications
There are a lot of Integrated Device Technology (IDT) 72V225L15PF FIFOs Memory applications.
- Buses
- SPD for DDR3 Memory Modules
- Measurement Equipment
- Smart Meter
- Video
- Multimedia
- Fabrication Site
- Firmware loaders
- Network bridges
- Signal processing
