72V225L15PFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 1KX18 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V225L15PFI Overview
TQFP is the package in which FIFO memory chip is contained.Surface Mount is recommended as the mounting method.A supply voltage of 3.3V allows for high efficiency.I found that it has 64 terminations in FIFO means.Operation pins are 64 .The maximum current required for its operation is 30mA .A supply voltage of 3.3V is recommended for FIFO's maximum efficiency.During operation, a minimum temperature of -40°C degrees Celsius should be maintained in order to ensure reliability.Its maximum operating temperature of 85°C °C ensures stable operation.In FIFOs , this gadget is self-contained.This part is equipped with an IC of type OTHER FIFO memory.In some cases, FIFO operates at a very low supply voltage, such as 3V V.The FIFO memory chip is capable of handling maximum supply voltages of 3.6V volts.This FIFO memory IC is equipped with 64 pins in total.In spite of the frequency 66.7MHz , it is capable of maintaining a good level of accuracy.It is recommended that the FIFO memory's maximum value be set to 66.7MHz .
72V225L15PFI Features
FIFOs category
Frequency at most
72V225L15PFI Applications
There are a lot of Integrated Device Technology (IDT) 72V225L15PFI FIFOs Memory applications.
- Magnetic memories
- Battery Charger
- General Data Collection Applications at Extreme High-Temperatures
- Industrial Systems
- Computer Systems
- Consumer Systems
- Buses
- TVs
- Multimedia
- IP Camera Buffer
