banner_page

72V225L15TF8

64 Terminations3.3V 64 Pin FIFO memory IC10 ns Min 3V VMax 3.6V V


  • Manufacturer: Integrated Device Technology (IDT)
  • Nocochips NO: 378-72V225L15TF8
  • Package: LQFP
  • Datasheet: PDF
  • Stock: 755
  • Description: 64 Terminations3.3V 64 Pin FIFO memory IC10 ns Min 3V VMax 3.6V V(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Lead, Tin
Mount Surface Mount
Package / Case LQFP
Number of Pins 64
Packaging Tape & Reel
Published 2005
JESD-609 Code e0
Pbfree Code no
Part Status Active
Moisture Sensitivity Level (MSL) 3
Number of Terminations 64
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn85Pb15)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Additional Feature EASILY EXPANDABLE IN DEPTH AND WIDTH
HTS Code 8542.32.00.71
Subcategory FIFOs
Technology CMOS
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.5mm
Frequency 66.7MHz
Time@Peak Reflow Temperature-Max (s) 20
Pin Count 64
Operating Supply Voltage 3.3V
Temperature Grade COMMERCIAL
Max Supply Voltage 3.6V
Min Supply Voltage 3V
Element Configuration Dual
Nominal Supply Current 30mA
Max Supply Current 30mA
Frequency (Max) 66.7MHz
Access Time 10 ns
Organization 1KX18
Density 18 kb
Standby Current-Max 0.005A
Parallel/Serial PARALLEL
Sync/Async Synchronous
Word Size 18b
Memory IC Type OTHER FIFO
Bus Directional Unidirectional
Retransmit Capability No
FWFT Support Yes
Output Enable YES
Cycle Time 15 ns
Height Seated (Max) 1.6mm
Length 10mm
Width 10mm
Thickness 1.4mm
RoHS Status RoHS Compliant
Lead Free Contains Lead

72V225L15TF8 Overview


FIFO memory chip is contained in the LQFP package.There's a Tape & Reel on the package.Mounting it Surface Mount is recommended.If the supply voltage is set to 3.3V , high efficiency can be achieved.In FIFO means, there are 64 terminations.These are the 64 pins for operation.There is a maximum current requirement of 30mA for its operation.FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.FIFOs contains this gadget in its entirety.A OTHER FIFO type memory IC is present in the FIFO memory chip.Typically, FIFO would work at 3V volts, but it may also work at higher voltages.FIFO memory is capable of handling a maximum supply voltage of 3.6V volts.There are a total of 64 pins on this FIFO memory IC.When the frequency is set to 66.7MHz it can maintain good accuracy.There is 66.7MHz FIFO memory IC's maximum value for regular operation.It is also possible to generate EASILY EXPANDABLE IN DEPTH AND WIDTH with the use of this FIFO memory.

72V225L15TF8 Features


FIFOs category
Frequency at most

72V225L15TF8 Applications


There are a lot of Integrated Device Technology (IDT) 72V225L15TF8 FIFOs Memory applications.

  • High-speed disk
  • Desktop Computers
  • Computers
  • Game Controller
  • Video Processing
  • IP Radio
  • Queues for communication systems
  • Network switching/routing
  • Disk Controllers
  • Computer Systems

Write a review

Note: HTML is not translated!
    Bad           Good