72V225L15TFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 1KX18 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V225L15TFI8 Overview
FIFO memory chip can be found in the LQFP package.In the shape of a Tape & Reel , it's packaged.It is recommended that memory IC be mounted in the Surface Mount direction.It is possible to achieve high efficiency with a supply voltage of 3.3V .FIFO means contains 64 terminations.64 pins are used for operation.FIFO requires a minimum of 30mA current to operate.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of -40°C degrees Celsius.As a result of having a maximum operating temperature of 85°C degrees Celsius, the unit is capable of exhibiting stable operation.FIFOs contains this gadget in its entirety.It has a type OTHER FIFO memory IC.FIFO may operate at very low supply voltages, such as 3V volts.A maximum supply voltage of 3.6V V can be handled by this FIFO memory chip.As a result, it contains a total of 64 pins.With a frequency of 66.7MHz , it maintains good accuracy.It is recommended that the FIFO memory's maximum value be set to 66.7MHz .
72V225L15TFI8 Features
FIFOs category
Frequency at most
72V225L15TFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72V225L15TFI8 FIFOs Memory applications.
- Consumer
- Product traceability
- Analog-to-digital converters
- Test site
- Portable Information Devices
- Alarm System
- SPI Bus Flash Memory Devices
- Temporary storage elements
- Programmable Logic Controller
- Switches
