Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Lead, Tin |
Mount |
Surface Mount |
Package / Case |
TQFP |
Number of Pins |
64 |
Published |
2005 |
Part Status |
Active |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Frequency |
50MHz |
Operating Supply Voltage |
3.3V |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
3V |
Element Configuration |
Dual |
Nominal Supply Current |
30mA |
Max Supply Current |
30mA |
Frequency (Max) |
50MHz |
Access Time |
12 ns |
Density |
18 kb |
Sync/Async |
Synchronous |
Word Size |
18b |
Bus Directional |
Unidirectional |
Retransmit Capability |
No |
FWFT Support |
Yes |
Length |
14mm |
Width |
14mm |
Thickness |
1.4mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
72V225L20PF8 Overview
You can find FIFO memory chip in package TQFP .The recommended mounting method for this FIFO products is Surface Mount .There are 64 pins on the operation pins.There is a maximum current requirement of 30mA for its operation.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.Typically, FIFO would work at 3V volts, but it may also work at higher voltages.The FIFO memory chip is capable of handling maximum supply voltages of 3.6V volts.A frequency of 50MHz is capable of maintaining good accuracy.During regular operation, the FIFO memory's maximum value is 50MHz .
72V225L20PF8 Features
Frequency at most
72V225L20PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V225L20PF8 FIFOs Memory applications.
- SPD for DDR3 Memory Modules
- HDD
- Data communications
- Queues for communication systems
- Event Recorder
- Controlled baseline
- Down-Hole Energy Drilling
- High-speed disk
- Alarm System
- Multi-stage synchronizer