72V225L20TF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | EASILY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 1KX18 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V225L20TF Overview
You can find FIFO memory chip in package TQFP .It is recommended that memory IC be mounted in the Surface Mount direction.High efficiency is possible with a supply voltage of 3.3V .FIFO means contains 64 terminations.As far as the operation pins are concerned, they are 64 pins.There is a maximum current requirement of 30mA for its operation.A supply voltage of 3.3V is recommended for FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Its maximum operating temperature of 70°C °C ensures stable operation.The gadget in FIFOs is self-contained.It has a type OTHER FIFO memory IC.FIFO may operate at very low supply voltages, such as 3V volts.A maximum supply voltage of 3.6V volts can be handled by the FIFO memory chip.It has a total of 64 pins on it.With a frequency of 50MHz , it exhibits good accuracy.Regular operation has a FIFO memory's maximum value of 50MHz .It is also possible to generate EASILY EXPANDABLE IN DEPTH AND WIDTH using this FIFO memory.
72V225L20TF Features
FIFOs category
Frequency at most
72V225L20TF Applications
There are a lot of Integrated Device Technology (IDT) 72V225L20TF FIFOs Memory applications.
- General Data Collection Applications at Extreme High-Temperatures
- IP Radio
- Look-up Tables
- Seismic Data Collection at Extreme Temperatures
- Computer Systems
- Transistors
- Address mapping
- Consumer
- Product traceability
- GPS Offender Tracking
