72V231L10J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 100MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 2KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V231L10J Overview
You can find FIFO memory chip in package PLCC .Surface Mount is recommended as the mounting method.If the supply voltage is set to 3.3V , high efficiency can be achieved.I found that it has 32 terminations in FIFO means.FIFO design has 32 operation pins.In order to operate FIFO design, a maximum current of 20mA is required.A 3.3V supply voltage will ensure FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.FIFOs contains this gadget in its entirety.It has a OTHER FIFO memory type IC.FIFO may operate at very low supply voltages, such as 3V volts.A maximum supply voltage of 3.6V volts can be handled by the FIFO memory chip.Currently, it has 32 pins.With a frequency of 100MHz , it maintains good accuracy.100MHz is the FIFO memory IC's maximum value for regular operation.
72V231L10J Features
FIFOs category
Frequency at most
72V231L10J Applications
There are a lot of Integrated Device Technology (IDT) 72V231L10J FIFOs Memory applications.
- Routers
- Programmable Logic Controller
- Portable Information Devices
- Temporary storage elements
- Network switching/routing
- TVs
- Seismic Data Collection at Extreme Temperatures
- Computer Systems
- Fabrication Site
- HDD
