72V231L10PFG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 2KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V231L10PFG Overview
The TQFP package contains FIFO memory chip.A Surface Mount mounting method is recommended.It is possible to achieve high efficiency with a supply voltage of 3.3V .A total of 32 terminations can be found in FIFO means.32 pins are the operation pins.FIFO design requires 20mA amps of current to operate.A 3.3V supply voltage will ensure FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.An operating temperature of 70°C °C is necessary for stable operation.The gadget is self-contained and can be found in FIFOs .There is a memory type OTHER FIFO in the IC of this part.It is possible to operate the FIFO memory chip at very low supply voltages, such as 3V volts.A maximum supply voltage of 3.6V volts can be handled by the FIFO memory chip.Approximately 32 pins are attached to it.In the presence of a 100MHz frequency, it can maintain good accuracy.Normally, the FIFO memory's maximum value is 100MHz .
72V231L10PFG Features
FIFOs category
Frequency at most
72V231L10PFG Applications
There are a lot of Integrated Device Technology (IDT) 72V231L10PFG FIFOs Memory applications.
- Code converters
- PC peripheral
- General Data Collection Applications at Extreme High-Temperatures
- Video
- Communications
- Buses
- Routers
- Communications Systems
- Wireless
- SPD for DDR3 Memory Modules
