72V231L10PFG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 32 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Max Supply Current | 20mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 2KX9 |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V231L10PFG8 Overview
The LQFP package contains FIFO memory chip.The recommended mounting way is Surface Mount .When the supply voltage is 3.3V , high efficiency is possible.As a result of this, FIFO means contains 32 terminations.As far as the operation pins are concerned, they are 32 pins.FIFO requires a minimum of 20mA current to operate.A voltage of 3.3V should be used for FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.A self-contained gadget is contained in FIFOs .The IC of the part is OTHER FIFO memory type.FIFO may operate at very low supply voltages, such as 3V volts.FIFO memory is capable of handling a maximum supply voltage of 3.6V volts.It has a total of 32 pins on it.During regular operation, 100MHz is the FIFO memory's maximum value.
72V231L10PFG8 Features
FIFOs category
Frequency at most
72V231L10PFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V231L10PFG8 FIFOs Memory applications.
- Programmable Logic Controller
- Look-up Tables
- Code converters
- Network bridges
- A/D output buffers
- Fabrication Site
- Network switching/routing
- Extended product-change notification
- Measurement Equipment
- Communications
