72V231L15J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 66.7MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 2KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V231L15J Overview
You can find FIFO memory chip in the PLCC package.Mounting it in Surface Mount is recommended.When the supply voltage is 3.3V there is the possibility of high efficiency.A total of 32 terminations can be found in FIFO means.FIFO design has 32 operation pins.In order to operate it, it requires 20mA volts of current.FIFO is recommended that the supply voltage be set to 3.3V in order to maximize efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.Its maximum operating temperature of 70°C °C ensures stable operation.FIFOs contains this gadget in its entirety.There is a memory type OTHER FIFO in the IC of this part.If the supply voltage is very low, such as 3V V, FIFO may be able to operate.FIFO memory can handle a maximum supply voltage of 3.6V volts.The FIFO memory IC has a total of 32 pins.When the frequency is set to 66.7MHz it can maintain good accuracy.There is 66.7MHz FIFO memory IC's maximum value for regular operation.
72V231L15J Features
FIFOs category
Frequency at most
72V231L15J Applications
There are a lot of Integrated Device Technology (IDT) 72V231L15J FIFOs Memory applications.
- Industrial Systems
- High-speed graphics pixel buffer
- Programmable Logic Controller
- Test site
- Extended product life cycle
- Networking
- Data-acquisition systems
- Video Processing
- Queues for communication systems
- IP Radio
