72V231L15J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LCC |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Max Supply Current | 20mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 2KX9 |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V231L15J8 Overview
FIFO memory chip is included in the LCC package.It is recommended that memory IC be mounted in the Surface Mount direction.An input voltage of 3.3V results in high efficiency.FIFO consists of 32 terminations, which indicates that FIFO means is empty.These are the 32 pins for operation.There is a maximum current requirement of 20mA for its operation.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.This gadget is self-contained in?FIFOs .It has a OTHER FIFO memory type IC.Low supply voltages, such as 3V V, may be required for operation.The memory logic's maximum supply voltage is 3.6V volts.This FIFO memory IC is equipped with 32 pins in total.Regular operation has a FIFO memory's maximum value of 66.7MHz .
72V231L15J8 Features
FIFOs category
Frequency at most
72V231L15J8 Applications
There are a lot of Integrated Device Technology (IDT) 72V231L15J8 FIFOs Memory applications.
- Desktop Computers
- Consumer
- High-speed graphics pixel buffer
- Computer networks
- GPS Offender Tracking
- Computer Systems
- Temporary storage elements
- Code converters
- Look-up Tables
- General Data Collection Applications at Low-Temperatures
