72V231L15PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 2KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V231L15PF Overview
The TQFP package contains FIFO memory chip.It is recommended that memory IC be mounted in the Surface Mount direction.When the supply voltage is 3.3V , high efficiency is possible.FIFO means contains 32 terminations.32 pins are used for operation.FIFO design requires a maximum current of 20mA to operate.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.It is self-contained in FIFOs .It has a type OTHER FIFO memory IC.It is possible to operate the FIFO memory chip at very low supply voltages, such as 3V volts.FIFO memory can handle a maximum supply voltage of 3.6V V.It has a total of 32 pins on it.It maintains good accuracy at a 66.7MHz frequency.It is recommended that the FIFO memory's maximum value be set to 66.7MHz .
72V231L15PF Features
FIFOs category
Frequency at most
72V231L15PF Applications
There are a lot of Integrated Device Technology (IDT) 72V231L15PF FIFOs Memory applications.
- Alarm System
- Analog-to-digital converters
- Programmable Logic Controller
- Communications
- Telecommunication
- HDD
- Video
- Consumer Systems
- Portable Information Devices
- Optical memories
