72V231L20J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 50MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 2KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V231L20J Overview
FIFO memory chip can be found in the PLCC package.It is recommended that memory IC be mounted in the Surface Mount direction.If the supply voltage is set to 3.3V , high efficiency can be achieved.FIFO means contains 32 terminations.These are the 32 pins for operation.In order to operate it, it requires 20mA volts of current.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.It is self-contained in FIFOs .The IC of the part is of the type OTHER FIFO .Low supply voltages, such as 3V V, may be required for operation.FIFO memory can handle a maximum supply voltage of 3.6V volts.Approximately 32 pins are attached to it.A frequency of 50MHz is capable of maintaining good accuracy.During normal operation, the FIFO memory's maximum value is 50MHz .
72V231L20J Features
FIFOs category
Frequency at most
72V231L20J Applications
There are a lot of Integrated Device Technology (IDT) 72V231L20J FIFOs Memory applications.
- MP3 Interface for Automobile
- General Data Collection Applications at Extreme High-Temperatures
- Look-up Tables
- SPI Bus Flash Memory Device
- Switches
- Digital buffering
- Routers
- Multimedia
- SPD for DDR3 Memory Modules
- Extended product-change notification
