72V231L20J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 50MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 2KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V231L20J8 Overview
FIFO memory chip can be found in the PLCC package.It is pointing in the direction of Surface Mount .High efficiency is possible with a supply voltage of 3.3V .In FIFO means, there are 32 terminations.These are the 32 pins for operation.FIFO requires a minimum of 20mA current to operate.When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.A self-contained gadget is contained in FIFOs .This part is equipped with an IC of type OTHER FIFO memory.Low supply voltages, such as 3V V, may be required for operation.An input voltage of 3.6V V is the maximum that FIFO memory can handle.There are a total of 32 pins on this FIFO memory IC.When the frequency is set to 50MHz it can maintain good accuracy.There is 50MHz FIFO memory IC's maximum value for regular operation.
72V231L20J8 Features
FIFOs category
Frequency at most
72V231L20J8 Applications
There are a lot of Integrated Device Technology (IDT) 72V231L20J8 FIFOs Memory applications.
- Product traceability
- Network bridges
- Smart Meter
- Rate buffers
- Multimedia
- Multi-stage synchronizer
- One assembly
- MP3 Interface for Automobile
- Battery Charger
- TVs
