72V233L6BC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Number of Pins | 100 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 166MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 166MHz |
| Access Time | 4 ns |
| Organization | 1KX18 |
| Density | 18 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6 ns |
| Height Seated (Max) | 1.5mm |
| Length | 11mm |
| Width | 11mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V233L6BC Overview
Mounting it Surface Mount is recommended.It is possible to achieve high efficiency with a supply voltage of 3.3V .A total of 100 terminations are contained within FIFO means.100 pin is used for operation.Its maximum operating current is 35mA .Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.FIFOs contains this gadget in its entirety.It has a OTHER FIFO memory type IC.There is a possibility that FIFO can operate at very low supply voltages, such as 3.15V V.A maximum voltage of 3.45V volts can be applied to FIFO memory.This FIFO memory IC is equipped with 100 pins in total.A frequency of 166MHz is capable of maintaining good accuracy.The memory logic's maximum value is 166MHz for regular operation.
72V233L6BC Features
FIFOs category
Frequency at most
72V233L6BC Applications
There are a lot of Integrated Device Technology (IDT) 72V233L6BC FIFOs Memory applications.
- Portable Information Devices
- Programmable Logic Controller
- HDD
- One assembly
- Video time base correction
- Cardiac Monitoring Device
- Tape controllers
- Transistors
- High-speed graphics pixel buffer
- Controlled baseline
