72V233L6PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 166MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 166MHz |
| Access Time | 4 ns |
| Organization | 1KX18 |
| Density | 18 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V233L6PF8 Overview
You can find FIFO memory chip in package TQFP .It is pointing in the direction of Surface Mount .A supply voltage of 3.3V is capable of producing high efficiency.In FIFO means, there are 80 terminations.These are the 80 pins for operation.In order to operate FIFO design, a maximum current of 35mA is required.In order to maximize efficiency, the supply voltage should be set to 3.3V .In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.This gadget is self-contained in?FIFOs .It has a type OTHER FIFO memory IC.FIFO may operate at very low supply voltages, such as 3.15V volts.An input voltage of 3.45V V is the maximum that FIFO memory can handle.It consists of a total of 80 pins.Despite a frequency of 166MHz , it is capable of maintaining good accuracy.Normally, the FIFO memory's maximum value is 166MHz .
72V233L6PF8 Features
FIFOs category
Frequency at most
72V233L6PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V233L6PF8 FIFOs Memory applications.
- Data communications
- SPI Bus Flash Memory Device
- Analog-to-digital converters
- Look-up Tables
- Extended product life cycle
- Digital buffering
- Controlled baseline
- Programmable Logic Controller
- Test Equipment
- Product traceability
