72V233L7-5PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 133.3MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 133.3MHz |
| Access Time | 5 ns |
| Organization | 1KX18 |
| Density | 18 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V233L7-5PF Overview
The TQFP package contains FIFO memory chip.Bulk case is used for packaging.A Surface Mount mounting method is recommended.Supply voltages of 3.3V are capable of achieving high efficiency.A total of 80 terminations are contained within FIFO means.80 pin is used for operation.There is a maximum current requirement of 35mA for its operation.A 3.3V supply voltage will ensure FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.In FIFOs , this gadget is self-contained.This part is equipped with an IC of type OTHER FIFO memory.Typically, FIFO would work at 3.15V volts, but it may also work at higher voltages.This FIFO memory chip can handle maximum supply voltages of 3.45V volts.Approximately 80 pins are attached to it.In spite of the frequency 133.3MHz , it is capable of maintaining a good level of accuracy.During regular operation, the FIFO memory's maximum value is 133.3MHz .
72V233L7-5PF Features
FIFOs category
Frequency at most
72V233L7-5PF Applications
There are a lot of Integrated Device Technology (IDT) 72V233L7-5PF FIFOs Memory applications.
- Look-up Tables
- Test Equipment
- Consumer Systems
- Communications
- Medical Monitoring Device
- HDD
- Industrial Systems
- Data-acquisition systems
- Communications Systems
- Magnetic memories
