72V235L10PF
| Parameters | |
|---|---|
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 2KX18 |
| Density | 36 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | EASILY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
72V235L10PF Overview
TQFP is the package in which FIFO memory chip is contained.Mounting it in Surface Mount is recommended.If the supply voltage is set to 3.3V , high efficiency can be achieved.64 terminations are contained in FIFO means.There are 64 pins for operation.In order for FIFO design to operate, a maximum current of 30mA is required.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.A self-contained gadget is contained within FIFOs .It has a OTHER FIFO memory type IC.FIFO may operate at a very low supply voltage, such as 3V V.FIFO memory can handle a maximum supply voltage of 3.6V V.Approximately 64 pins are attached to it.A frequency of 100MHz is sufficient to maintain good accuracy.During normal operation, the FIFO memory's maximum value is 100MHz .It is also possible to generate EASILY EXPANDABLE IN DEPTH AND WIDTH with the use of this FIFO memory.
72V235L10PF Features
FIFOs category
Frequency at most
72V235L10PF Applications
There are a lot of Integrated Device Technology (IDT) 72V235L10PF FIFOs Memory applications.
- Fabrication Site
- Desktop Computers
- Optical memories
- Data-acquisition systems
- Video
- Portable Information Devices
- Multimedia
- Test site
- IP Radio
- Firmware loaders
