72V235L10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | EASILY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 2KX18 |
| Density | 36 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V235L10PF8 Overview
The TQFP package contains FIFO memory chip.Surface Mount is recommended as the mounting method.If the supply voltage is set to 3.3V , high efficiency can be achieved.FIFO consists of 64 terminations, which indicates that FIFO means is empty.There are 64 pins on the operation pins.FIFO requires a minimum of 30mA current to operate.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.In FIFOs , this gadget is self-contained.This part has a memory type of OTHER FIFO .The FIFO memory chip may be operated at very low supply voltages, such as3V volts.FIFO memory can handle a maximum supply voltage of 3.6V volts.The FIFO memory IC is equipped with a total of 64 pins.A frequency of 100MHz is capable of maintaining good accuracy.It is recommended that the FIFO memory's maximum value be set to 100MHz .The gadget can also generate a value of EASILY EXPANDABLE IN DEPTH AND WIDTH .
72V235L10PF8 Features
FIFOs category
Frequency at most
72V235L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V235L10PF8 FIFOs Memory applications.
- Firmware loaders
- Analog-to-digital converters
- Telecommunication
- Network switching/routing
- Wireless
- Character generators
- Measurement Equipment
- Laser Receiver System
- Digital buffering
- Fabrication Site
