72V235L10TF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | EASILY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 2KX18 |
| Density | 36 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V235L10TF Overview
FIFO memory chip is included in the LQFP package.It is recommended that memory IC be mounted in the Surface Mount direction.A supply voltage of 3.3V is capable of producing high efficiency.FIFO consists of 64 terminations, which indicates that FIFO means is empty.These are the 64 pins for operation.In order to operate FIFO design, a maximum current of 30mA is required.When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.The gadget in FIFOs is self-contained.A OTHER FIFO type memory IC is present in the FIFO memory chip.Low supply voltages, such as 3V V, may be required for operation.The memory logic's maximum supply voltage is 3.6V volts.A total of 64 pins are present on the FIFO memory IC.In spite of the frequency 100MHz , it is capable of maintaining a good level of accuracy.A FIFO memory's maximum value of 100MHz can be used for regular operation.It is also possible to generate EASILY EXPANDABLE IN DEPTH AND WIDTH using this FIFO memory.
72V235L10TF Features
FIFOs category
Frequency at most
72V235L10TF Applications
There are a lot of Integrated Device Technology (IDT) 72V235L10TF FIFOs Memory applications.
- Consumer Systems
- A/D output buffers
- Queues for communication systems
- Multimedia
- Desktop Computers
- Video
- Multi-stage synchronizer
- High-speed graphics pixel buffer
- Data-acquisition systems
- Cameras
