72V235L15PF8
| Parameters | |
|---|---|
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 2KX18 |
| Density | 36 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | EASILY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
72V235L15PF8 Overview
You can find FIFO memory chip in package TQFP .Mounting it in the Surface Mount way is recommended.An input voltage of 3.3V results in high efficiency.A total of 64 terminations can be found in FIFO means.As far as the operation pins are concerned, they are 64 pins.Its maximum operating current is 30mA .For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.The gadget is self-contained and can be found in FIFOs .It has a type OTHER FIFO memory IC.There is a possibility that FIFO may operate at a very low supply voltage, such as 3V V.FIFO memory can handle a maximum supply voltage of 3.6V volts.Approximately 64 pins are attached to it.When the frequency is set to 66.7MHz , the system can maintain good accuracy.There is 66.7MHz FIFO memory IC's maximum value for regular operation.It is also possible to generate EASILY EXPANDABLE IN DEPTH AND WIDTH using this FIFO memory.
72V235L15PF8 Features
FIFOs category
Frequency at most
72V235L15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V235L15PF8 FIFOs Memory applications.
- Telecommunication
- Extended product life cycle
- Controlled baseline
- Wireless
- Test Equipment
- SPI Bus Flash Memory Device
- Fabrication Site
- Medical Monitoring Device
- Alarm System
- Tape controllers
