72V235L15PFI
| Parameters | |
|---|---|
| Data Bus Width | 18b |
| Organization | 2KX18 |
| Density | 36 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
72V235L15PFI Overview
You will find FIFO memory chip in the TQFP package.Memory IC's recommended mounted way is Surface Mount .A supply voltage of 3.3V is capable of producing high efficiency.A total of 64 terminations can be found in FIFO means.FIFO design has 64 operation pins.FIFO design requires a maximum current of 30mA to operate.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.During operation, a minimum temperature of -40°C degrees Celsius should be maintained in order to ensure reliability.By operating at a temperature of 85°C °C, the FIFO products is capable of stable operation.There is a self-contained gadget within FIFOs .The IC of the part is OTHER FIFO memory type.Low supply voltages, such as 3V V, may be required for operation.FIFO memory can handle a maximum supply voltage of 3.6V volts.There are a total of 64 pins on this board.It is capable of maintaining good accuracy with a frequency of 66.7MHz .During normal operation, the FIFO memory's maximum value is 66.7MHz .
72V235L15PFI Features
FIFOs category
Frequency at most
72V235L15PFI Applications
There are a lot of Integrated Device Technology (IDT) 72V235L15PFI FIFOs Memory applications.
- Video Processing
- Smart Meter
- Rate buffers
- Wireless
- Signal processing
- MP3 Interface for Automobile
- Programmable Logic Controller
- Game Controller
- Buses
- Measurement Equipment
