72V235L15TFGI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Bulk |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 2KX18 |
| Density | 36 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V235L15TFGI Overview
You will find FIFO memory chip in the LQFP package.There is a case Bulk in which it is packaged.Surface Mount is memory IC's recommended mounting method.A supply voltage of 3.3V is capable of producing high efficiency.A total of 64 terminations are contained within FIFO means.Operation pins are 64 .There is a maximum current requirement of 30mA for its operation.In order to maximize efficiency, the supply voltage should be set to 3.3V .During operation, a minimum temperature of -40°C degrees Celsius should be maintained in order to ensure reliability.The memory logic's maximum operating temperature is 85°C °C, which allows for stable operation.The gadget in FIFOs is self-contained.The IC of the part is of the type OTHER FIFO .FIFO may operate at very low supply voltages, such as 3V volts.An input voltage of 3.6V V is the maximum that FIFO memory can handle.Approximately 64 pins are attached to it.Despite a frequency of 66.7MHz , it is capable of maintaining good accuracy.It is recommended that the FIFO memory's maximum value be set to 66.7MHz .
72V235L15TFGI Features
FIFOs category
Frequency at most
72V235L15TFGI Applications
There are a lot of Integrated Device Technology (IDT) 72V235L15TFGI FIFOs Memory applications.
- Measurement Equipment
- Smart Meter
- Multi-stage synchronizer
- Data
- Programmable Logic Controller
- Emulators
- Cardiac Monitoring Device
- Signal processing
- Video time base correction
- High-speed disk
