72V235L20TF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | EASILY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 2KX18 |
| Density | 36 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V235L20TF8 Overview
The LQFP package contains FIFO memory chip.You'll find it packaged in the shape of a Tape & Reel .Memory IC's recommended mounted way is Surface Mount .Supply voltages of 3.3V are capable of achieving high efficiency.FIFO consists of 64 terminations, which indicates that FIFO means is empty.In the case of the operation pins, they are 64 pins.FIFO design requires 30mA amps of current to operate.When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.It operates at 0°C degrees Celsius to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.In FIFOs , there is a self-contained gadget.The IC of the part is of the type OTHER FIFO .It is possible to operate the FIFO memory chip at very low supply voltages, such as 3V volts.The FIFO memory chip is capable of handling maximum supply voltages of 3.6V volts.Approximately 64 pins are attached to it.With a frequency of 50MHz , it maintains good accuracy.Normally, the FIFO memory's maximum value is 50MHz .This gadget can also be used to generate EASILY EXPANDABLE IN DEPTH AND WIDTH .
72V235L20TF8 Features
FIFOs category
Frequency at most
72V235L20TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V235L20TF8 FIFOs Memory applications.
- Extended product life cycle
- Multi-stage synchronizer
- Measurement Equipment
- Thermal Management for DDR3 Memory Modules
- Test site
- Tape controllers
- Computers
- Routers
- IP Radio
- Communications
