72V241L10J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 100MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 4KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V241L10J8 Overview
FIFO memory chip can be found in the PLCC package.Mounting it in Surface Mount is recommended.Supply voltages of 3.3V are capable of achieving high efficiency.FIFO consists of 32 terminations, which indicates that FIFO means is empty.32 pin is used for operation.In order to operate FIFO design, a maximum current of 20mA is required.When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.The gadget is self-contained and can be found in FIFOs .This part has a memory type of OTHER FIFO .FIFO may operate at very low supply voltages, such as 3V volts.FIFO memory is capable of handling a maximum supply voltage of 3.6V volts.A total of 32 pins are present on the FIFO memory IC.With a frequency of 100MHz , it maintains good accuracy.It is recommended that the FIFO memory's maximum value be set to 100MHz .
72V241L10J8 Features
FIFOs category
Frequency at most
72V241L10J8 Applications
There are a lot of Integrated Device Technology (IDT) 72V241L10J8 FIFOs Memory applications.
- Telecommunication
- SPI Bus Flash Memory Device
- Consumer Systems
- Data communications
- Code converters
- Video
- Programmable Logic Controller
- Application that requires re-writable nonvolatile parameter memory
- Multimedia
- Seismic Data Collection at Extreme Temperatures
