72V241L10PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Weight | 72.801575mg |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Memory Size | 4.5kB |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Data Bus Width | 9b |
| Organization | 4KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height | 1.4mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V241L10PF Overview
You can find FIFO memory chip in the TQFP package.It is possible to store data and applications on the FIFO chips as they have 4.5kB in their memory.Memory IC's recommended mounted way is Surface Mount .Supply voltages of 3.3V are capable of achieving high efficiency.A total of 32 terminations can be found in FIFO means.In the case of the operation pins, they are 32 pins.The maximum current required for its operation is 20mA .When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.In FIFOs , this gadget is self-contained.In this part, the memory type is OTHER FIFO .Typically, FIFO would work at 3V volts, but it may also work at higher voltages.A maximum supply voltage of 3.6V V can be handled by this FIFO memory chip.It has a total of 32 pins on it.When the frequency is set to 100MHz , the system can maintain good accuracy.100MHz is the FIFO memory IC's maximum value for regular operation.
72V241L10PF Features
4.5kB memory size
FIFOs category
Frequency at most
72V241L10PF Applications
There are a lot of Integrated Device Technology (IDT) 72V241L10PF FIFOs Memory applications.
- Test Equipment
- Multi-stage synchronizer
- Notebook
- Down-Hole Energy Drilling
- Queues for communication systems
- Microprogramming
- Product traceability
- Video time base correction
- Network bridges
- Data communications
