72V241L10PF8
| Parameters | |
|---|---|
| Density | 36 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 4KX9 |
72V241L10PF8 Overview
You will find FIFO memory chip in the TQFP package.It is recommended that memory IC be mounted in the Surface Mount direction.A supply voltage of 3.3V is capable of producing high efficiency.FIFO consists of 32 terminations, which indicates that FIFO means is empty.There are 32 pins on the operation pins.In order to operate it, it requires 20mA volts of current.A voltage of 3.3V should be used for FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.In FIFOs , this gadget is self-contained.The IC of the part is OTHER FIFO memory type.It is possible to operate the FIFO memory chip at very low supply voltages, such as 3V volts.The FIFO memory chip is capable of handling maximum supply voltages of 3.6V volts.A total of 32 pins are present on the FIFO memory IC.A frequency of 100MHz is capable of maintaining good accuracy.Normally, the FIFO memory's maximum value is 100MHz .
72V241L10PF8 Features
FIFOs category
Frequency at most
72V241L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V241L10PF8 FIFOs Memory applications.
- Routers
- Extended product-change notification
- Down-Hole Energy Drilling
- Signal processing
- GPS Offender Tracking
- Portable Information Devices
- Video time base correction
- Switches
- Industrial Systems
- Telecommunication
